Edaboard.com

Foros ES => Electrónica => Topic started by: mauruxus on September 13, 2016, 05:55:43 PM

Title: how can i program this micro?
Post by: mauruxus on September 13, 2016, 05:55:43 PM
this micro is suposed to receive in the input pin 4 different frequency signals so that at the outputs pin move the motors clockwise or anticlockwise depending on the frequency at the input pin.
i want to know what particular topic about pics programation should i study.

i want to use the pic 12F629 or 12C508, the software would be MPLAB. the schematic is in the link:

subefotos.com/ver/?460242b03890efe6b6ca62b3854a4d5bo.jpg

thanks.